I use to be able to scroll infinitely until I lifted my thumb. Now it always stops at the next channel forcing me to continually click over and over until I arrive at my channel. Thanks.
Works by holding the ring around the ‘OK’ button on my remote. I just have to hold it for a second or so.
That does not work for me. It just stops at the channel above or below. If I move 4 hours into the future then no problem going up or down. Maybe it's just a glitch on my machine.
@Reggie Hi, it is likely to be a hardware issue. Could you please try rebooting your TV set top box by following this guide. If issue persists, please contact our tech support at 310-TECH (8324) for support.
Thanks for trying psl but no go. Should mention this is on the 4K pvr receiver only. No problem on the old HD non pvr models.
Upon further reflection I believe it's the small tv box inside the guide. When looking at what's on now it can't load the videos fast enough to scroll from channel to channel. If I move into the future a couple of hours there is no video to load so I can scroll easily. I guess if I get high speed it will be fixed but I have no plans at this time.