Forum Discussion

ColtZ's avatar
ColtZ
Neighbour
5 months ago

[URGENT] Boost Wi-Fi 7 (B02E) Cannot Obtain Public IP in NAH Bridge Mode

I'm trying to optimize my Telus PureFibre network by setting my Boost Wi-Fi 7 device as the primary router to manage my Mesh network effectively. My current topology relies on the NAH -> Coax Adapte...
snowface's avatar
snowface
Friendly Neighbour
5 months ago

Try first connecting the bridge port to PC and see if the bridge port works on single device. After that as Nighthawk​ has mentioned, you do need a router if connecting more than one device coz Boost is just an access point.

Nighthawk's avatar
Nighthawk
Icon for Community Power User rankCommunity Power User
5 months ago

I would not recommend connecting a PC to the bridged port. Residential service is limited to 2 IP addresses and if they're both used up already, which I suspect there's a good chance that they are, the PC wouldn't be able to connect out on the bridged port. Basically what needs to be done is the NAH has to either have the bridge mode disabled or a full reset. It had a valid IP and could connect out before. The Boost units can still be managed separately from the NAH when it's not in bridge mode.

Related Content