Forum Discussion
Solved
Separating 2.4ghz and 5 ghz network on NH20A
Hi, I have a telus NH20A modem/router and 5 additional access points. All is well except several ecobee 3 lites that cannot see my network as they work exclusively on 2.4ghz. Is there a way to ...
If you are able to log in the NH20A, in the list of connected devices look for one identified as "Boost2.0-" followed by four random characters. Example Boost2.0-a1bc. There should only be one primary unit. The IP address associated with the main Boost unit is what you'll enter in to the browser. The username as always is admin and the password is on a sticker under the cap on the bottom of the Boost unit.
From there, I recommend reviewing the recent discussion about 2.4GHz and smart lights with this hardware combo (NH20A/Boost). That includes a smart device network on the Boost that can be enabled. Whether or not that'll work with the additional Boost units, I do not know. I've only got the single Boost 2.0 unit by itself.
All fixed now thanks to you.
Got in to the right access point, turned off 5ghz, reset all ecobees, added them back on 2.4ghz and then turned 5g back on .... DONE.
