Forum Discussion
Solved
Port Forwarding - port open but no traffic moves?
Hi there. I have a device inside my LAN that is answering on port 8080. I can connect to it at 192.168.1.xx from elsewhere within the LAN and the service is there and working.
Then I forwarded inbound WAN connections and set the rules for both TCP and UDP to forward that one port on my inside server.
I tried a few of those "Port Checker" tools on the internet e.g. https://www.yougetsignal.com/tools/open-ports/ and they can see that the port is Open.
So I try:
$ wget http://<mywanip>:8080
or try to point my browser at that and it just hangs. I chatted with Telus L1 Tech Team and they were able to hit my service ok, so we know the port-forwarding is working.
So my question is why can't I access this service from outside? I have done this several times before without issue, for gaming etc. It's a T3200M and I'm on unlimited fibre.
Thanks for any advice.
Cheers
Bryan
Yes - the service is accessible on the WAN IP only from outside. Bizarre. Thanks!
3 Replies
Replies have been turned off for this discussion
- Nighthawk
Community Power User
You won't be able to access a device hosted on your LAN by entering your WAN IP on a device on that same LAN. If you have one device that has either a VPN or a cellular connection, try that and connect to the WAN IP. This is a known issue and the way Telus has their stuff configured for a long time. Front line tech support likely has no clue of this as they don't usually provide support for port forwarding.
I have a T3200M, and fibre, and I've been forwarding ports on it for some time.
Yes - the service is accessible on the WAN IP only from outside. Bizarre. Thanks!
- FuzzyLogic
