Forum Discussion
Boost Router - Need to Disconnect and Reconnect Frequently to Print from Mac or iPhone - How to Fix?
Hi - we have the Boost Wi-Fi Router and two Boost stations. We use a combination of MacBooks and iPhone devices. We have to frequently disconnect and reconnect to print via Epson Wi-Fi printer (IP or...
FuzzyLogic
Community Power User
Community Power UserYou may wish to split your bands and use separate SSID's for the bands. I've found that my various Apple devices aren't always happy roaming around and choosing the 'best' band.
Alternatively a quick fix is often just to turn wi-fi on and off on the problem device.
Thanks for the suggestions. Definitely not splitting the SSIDs since it causes a multitude of other problems. Turning devices on and off is also not much of a solution. Should I call Telus support? There must be a better solution out there.
- FuzzyLogic
I have only iPhones/iPads so I can't speak to the Macbook issues. My experience is the these devices don't always 'transition' well between 2.4 and 5 Ghz with the same SSID. The device will be connected to 5 Ghz with a very poor connection and struggles with the network when it should be switching to 2.4 Ghz. A quick toggle of wi-fi usually resolves the issue for me (no need to turn the device off). This was why I was suggesting having two SSID's to help troubleshoot. When you have problems you can easily see which band the device is currently operating on.
There may be some things to try here as well:
I have Wi-Fi Explorer on my MacBook. It gives very detailed information on all aspects of our Wi-Fi network and devices. What should I look for to diagnose the problem?
Thanks!
