Forum Discussion
Anon125
4 years agoAdvocate
are there any telus installers on this forum?
our internet is on one phone socket but not the others.
how did they do that?
Anon125 You will have new fiber line to house. A new box outside then fiber into house to an ONT ( needs power outlet ) Your inside phone wires can be put on the ont. Old phone wires are disconnected from incoming phone wire and hooked to ONT. Hopefully the site for ont has 120 there and also your inside tel wires. The tech will take care of that. Note phone will not work during power outage they may supply a battery backup if you ask (needs 120 also). Old tel wire to house no used anymore.
8 Replies
Replies have been turned off for this discussion
- Anon125Advocate
Thanks everyone
- Anon125Advocate
ONT-optical network terminal
- rcRockstarIf you are not connected to fibre, a splitter is installed in the small TELUS box on the outside of your house. This splitter directs the adsl signals to one Jack.
- FuzzyLogic
Community Power User
- Anon125Advocate
thanks for trying
- Anon125Advocate
Also, when they convert us to fibre, is that done at the utility pole?
will we still use the phone for the internet?
still on one phone socket?
- NFtoBC
Community Power User
You will need Cat 5a or Cat 6 ethernet cable to distribute the network traffic throughout your house. Telephone wires won’t work. If a new install, the installation tech will try to locate the fibre connection near your current modem location.
- polecatAll-Star
Anon125 You will have new fiber line to house. A new box outside then fiber into house to an ONT ( needs power outlet ) Your inside phone wires can be put on the ont. Old phone wires are disconnected from incoming phone wire and hooked to ONT. Hopefully the site for ont has 120 there and also your inside tel wires. The tech will take care of that. Note phone will not work during power outage they may supply a battery backup if you ask (needs 120 also). Old tel wire to house no used anymore.
Related Content
- 7.3KViews6Comments