Forum Discussion
Solved
2.4 GHz network
Need to have a separate 2.4 GHz network to sync some hardware. Cannot find any method of either setting up a separate 2.4 GHz network or forcing current modem to 2.4 GHz mode.
Help
As mentioned you will need to disable smart steering. Here is an in depth article on working with these settings for the T3200M:
Managing Wi-Fi on Actiontec T3200M | TELUS Support
3 Replies
Replies have been turned off for this discussion
I used 3 bands, 2.4G, 5G low and 5G high, with same SSID, and successfully connected to Ecovacs DEEBOT which can only be matched by 2.4G when they are all enabled.
- NFtoBC
Community Power User
If you have the T3200M router, you can turn off Smart Steering in settings. On the newer Arcadian Hub, you may be able to turn off the 5 GHz radio temporarily in settings, and turn it on again once you have set up your devices.
- FuzzyLogic
As mentioned you will need to disable smart steering. Here is an in depth article on working with these settings for the T3200M:
Managing Wi-Fi on Actiontec T3200M | TELUS Support
