Organizer
•
13 Messages
Closed
Using 2 routers and IP Address
I am posting this wondering how anyone who puts a switch between their ONT and routers manage to get around the issue of only having 1 IP Address? I have internet 150/150 and there's only 1 IP Address provided and I want to use my own router while keeping the Actiontec router for optik tv.
I've notice my router goes down here and there because of the lack of 2 ip addresses I believe but it works for a few days before it goes down. So i'm wondering how some of you get around this.
Discussion
•
Updated
30.2K
3
0
0
Top Contributors
View MoreTELUS_Support
+22 more
Community Manager
•
8.1K Messages
FuzzyLogic
+25 more
Community Power User
•
1.8K Messages
Coach
•
30 Messages
Community Stats
Total Posts
Total Members
Total Posts with Accepted Solutions
linuxgeek
+5 more
Coach
•
Can you check the subnet of the ip address that telus gave you? Another thing you can do, if you are not concern about having two separate public ip address, you can use your own router by connecting it to the router that telus provided to you.
7
0
DrPacman
+12 more
Rockstar
•
Good afternoon…
I’m following this discussion with great interest. I as well would like to enable a second public IP on my system. Utilizing the T3200M modem/Router in Bridged mode, are we not able to utilize the second LAN port to issue a second public IP address?
I was able to utilize the second LAN port on my Shaw modem to facilitate this ability when the modem was in bridged mode…
17
0
telusdetective
+3 more
Helpful Neighbour
•
I don't know if it's different with fibre (I only have DSL), but Telus allotted two IPs per line since they started.
I have an Actiontec gateway, with my own router connected in Bridge Mode, and both devices have their own external IP.
0