samiam
+2 more
Advisor
•
46 Messages
Closed
Multiple TVs result in "lost internet connection" error
Telus Fibre with Optik TV. We have 3 of the newer digital boxes. All connected to a TM3200M 5G WiFi signal. Speed test looks good, 250Mb/s up and down. One TV on an HD channel is no problem. 2 sometimes causes glitching, or quality to automatically throttle down so the video gets more blurry, 3 TV's cause all 3 to freeze and show "lost internet" type messages. Only way to get it back is to shut down two of the boxes and reboot one of them. This is kind of a deal breaker for me unless someone can suggest some fix that was missed somewhere. Yes, the optik TV option on the router is enabled. I tried enabled and disabled but it didn't seem to matter.
Discussion
•
Updated
8.8K
3
0
0
Top Contributors
View MoreTELUS_Support
+22 more
Just Moved In
•
8.1K Messages
594
FuzzyLogic
+25 more
Just Moved In
•
1.8K Messages
66
Coach
•
30 Messages
30
Community Stats
Total Posts
Total Members
Total Posts with Accepted Solutions
Accepted Solution
samiam
+2 more
Advisor
•
The Telus tech replaced our T3200M with a separate ethernet router/switch + a cylindrical WiFi radio that supports WiFi 6 (802.11ax). I don't know the model names/numbers but he said it was all the latest stuff. Now I get low pings on WiFi, max speedtests up to my plan limit (250mbps symmetrical), and all 3 TVs working simultaneously on HD. So that was the ultimate solution in this case.
Enabling WMM on the T3200M also worked but that adds an additional 15ms to the 5Ghz WiFi ping times. The tech said that our T3200M should have had newer firmware than v31.164L.22, which it got back in Aug 2020. So perhaps forcing an update to the latest firmware might have helped.
The newer hardware doesn't have any WMM settings to deal with to get all 3 TVs working and doesn't increase ping times like the T3200M does when you enable WMM, so that appears to be the best solution in my case.
2
samiam
+2 more
Advisor
•
One other thing. Putting a TV on the 2.4Ghz Wifi with the other two on 5Ghz seems to help but it's still glitchy.
3
0
samiam
+2 more
Advisor
•
I am hoping the tech replaces the T3200M with one of those newer cylindrical routers that handle the newer WiFi standards. I think my problem was that I had WMM disabled. The factory reset enabled that and so far all 3 boxes work flawlessly streaming HD content simultaneously. Although having WMM enabled seems to improve the speed quite a bit, where I always get the max 250mb/s now, it adds about 15ms to the ping time. A router change should improve that as well.
1