robg1
+1 more
Helpful Neighbour
•
11 Messages
Login to router
I'm trying to login to my router, "Z wave plus", which I've always been able to do but recently, it refuses to let me. I've never changed the default password, and even trying to change the password, it asks for the default password printed on the router, which I enter but it still says that the password is incorrect. What's the solution?
Discussion
•
Updated
7.9K
3
0
0
Top Contributors
View MoreTELUS_Support
+22 more
Community Manager
•
8.1K Messages
FuzzyLogic
+25 more
Community Power User
•
1.8K Messages
Coach
•
30 Messages
Community Stats
Total Posts
Total Members
Total Posts with Accepted Solutions
Accepted Solution
robg1
+1 more
Helpful Neighbour
•
Sorry, a little late replying. Turns out that I should have been logging in to 192.168.1.41 to access the router, not 192.168.1.254 (the NAH). Everything is fine now.
0
0
FuzzyLogic
+25 more
Community Power User
•
Have you tried powering off/on the router?
1
0
TELUS_Support
+22 more
Community Manager
•
Hey robg1 - Try this: The "Hard" Factory Reset
Since the password on the sticker isn't working, you need to force the router back to its "factory born" state. This wipes any custom settings and forces it to honor the password printed on the label.
Locate the Reset Hole: Look at the back or side of your router for a tiny hole labeled RESET.
The Paperclip Trick: While the router is powered on, insert a paperclip or pin.
The 15-Second Rule: Press and hold the button for a full 15 seconds. You will see the lights on the front flash or turn off.
Wait for the Reboot: Give it about 3–5 minutes to fully restart and stabilize.
2. Logging Back In
Once the router has rebooted, try the login process again using the exact credentials on the sticker:
URL: Usually 192.168.1.254 or http://telus.vmedia.
Username: Typically admin.
Password: Use the Admin Password (not the Wi-Fi password!) found on the sticker.
14
0