Titanium
+1 more
Organizer
•
9 Messages
Closed
Bypass Telus ONT/router with SFP in own router
Some claim this will work, others say it has problems and wont.
Let's say your default fiber setup is a Telus optical SFP transceiver attached to the T3200M/other.
Unplug the SFP and plug it into your own SFP capable router, or into a media converter and then a SFP to RJ45 and cat6 to your own non-SFP router, done. A few comments here and other places online claim it's as easy as that.
DrPackman here claims...
"TELUS installed the T3200M router/gateway on my system so the SFP module was already registered with TELUS. Pulled it from the router and install it in the USG Pro 4. That was it…"
https://forum.telus.com/t5/Internet-Home-Phone/Eliminate-Nokia-ONT-go-direct-to-my-own-router-s-SFP-port/m-p/107838
But other people say it's not really possible for home residential use (my purpose)
https://forum.telus.com/t5/Business/Regular-Internet-outages-when-using-bypassing-Telus-router/td-p/105811
Claiming outages every hour due to "non-standard implementation of ARP (Address Resolution Protocol)"
And then say that "Telus will enable ARP on a business service but will not on a residential service, so in that case you're stuck with the ActionTec modem" aka not possible to bypass for home.
Also a distant colleague claims he plugged the Telus SFP into his router but it didn't work until he changes the Mac address of the router and that telus SFP is locked to only a certain Mac address device "
"I have router with SFP module I take out (Telus) SFP module and insert in my router change mac address of router and it works but if you don't change mac address it will not work"
So these two problems mentioned are conflicting with the comments of other people saying it just works. If it works you'd think they'd mention in their posts they have mac issues and constant ARP network drops
Let's say your default fiber setup is a Telus optical SFP transceiver attached to the T3200M/other.
Unplug the SFP and plug it into your own SFP capable router, or into a media converter and then a SFP to RJ45 and cat6 to your own non-SFP router, done. A few comments here and other places online claim it's as easy as that.
DrPackman here claims...
"TELUS installed the T3200M router/gateway on my system so the SFP module was already registered with TELUS. Pulled it from the router and install it in the USG Pro 4. That was it…"
https://forum.telus.com/t5/Internet-Home-Phone/Eliminate-Nokia-ONT-go-direct-to-my-own-router-s-SFP-port/m-p/107838
But other people say it's not really possible for home residential use (my purpose)
https://forum.telus.com/t5/Business/Regular-Internet-outages-when-using-bypassing-Telus-router/td-p/105811
Claiming outages every hour due to "non-standard implementation of ARP (Address Resolution Protocol)"
And then say that "Telus will enable ARP on a business service but will not on a residential service, so in that case you're stuck with the ActionTec modem" aka not possible to bypass for home.
Also a distant colleague claims he plugged the Telus SFP into his router but it didn't work until he changes the Mac address of the router and that telus SFP is locked to only a certain Mac address device "
"I have router with SFP module I take out (Telus) SFP module and insert in my router change mac address of router and it works but if you don't change mac address it will not work"
So these two problems mentioned are conflicting with the comments of other people saying it just works. If it works you'd think they'd mention in their posts they have mac issues and constant ARP network drops
Discussion
•
Updated
11.7K
1
0
0
Top Contributors
View MoreTELUS_Support
+22 more
TELUS Team Member
•
8.1K Messages
591
FuzzyLogic
+25 more
Just Moved In
•
1.8K Messages
66
Coach
•
30 Messages
30
Community Stats
Total Posts
Total Members
Total Posts with Accepted Solutions
Accepted Solution
DrPacman
+12 more
Rockstar
•
Titanium Wrote: DrPacman here claims...TELUS 1Gb/s fiber directly connected to a Ubiquity Security Gateway Pro 4 via the Wan 1 SFP port. Works flawlessly…
Well all I can tell you is I ran my 1Gbps fibre into a Ubiquity Security Gateway Pro 4 for over a year that way without one single problem. Then I upgraded to a Ubiquiti USG-XG-8 router, and had to lock the SFP+ WAN port at 1Gbps. That as well has worked flawlessly for the last 2 odd years.
Now I have upgraded to the 1.5Gbps service and had to place the FX500 into bridged mode and had to now lock the SFP+ WAN port at 10Gbps. again seeing no problems.
I guess it all depend on what router you utilize. I would guess some cheap routers may have problems. However, I have not.... Cheers...
If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.
2