I see on the PureFibre sign-up page that Telus gives you an "Advanced Wifi Modem". From speaking with Telus I'm assured that there is definitely an ONT.
So the default setup from Telus should look like this: Fibre-in > ONT > CAT5/6 Ethernet > Modem > CAT5/6 Ethernet > whatever else you like
Of course, a Modulator/demodulator behind a FTTP ONT is a nonsensical thing.
So what exactly IS this supposed "modem" and what does it actually do???
Typically I should be able to plug my (way better than Telus') router directly into the ONT for internet, can I do that with this?
Solved! Go to Solution.
Would you mind rephrasing your response, @valiaig? I'm afraid I don't quite understand what you're saying. Thanks!
An ONT is an Optical Network Terminal. This device connects the fibre that has been wired the outside of your house, to your modem.
The ONT is a small white plastic box (180mm x50mm x 120mm) that will be placed on your internal wall.
It’s important that you think about where the ONT is placed before our technician arrives for your 'Agree' appointment as this can impact your broadband experience. Your modem ( multicast capable router) will plug into your ONT so it should ideally be:
Fibre is a glass that transmits highly focused light and that light has to be turned into signal and back to transmit information
ONT is signal transmission converter and not modem because your Advanced WIFI modem takes care of acting as one (so called "modem". Its Called Gateway because TELUS use IP technology for ALL of its services. even home phone is no longer traditional anymore T3200m router is able to multicast and thus TELUS uses it./ Simply put term "modem" no longer applies to Telus based on infrastructure they use today.
You may also use Apple Airport Extreme 6th generation router to act as multicast Gateway. As its the only router I saw Telus tech (my friend) was using at home
Things go back to TELUS:
- TELUS Optik PVR
- TELUS digital and wireless STBs
- T3200m Wifi Gateway/router
-Mesh WIFI (if rented)