Forum Discussion

BCTV's avatar
BCTV
Helpful Neighbour
2 years ago
Solved

Programming Google Remote To Old Sharp TV

Recently signed up for Telus, and did self install for 2 optik tv+ digital boxes. Main living room tv had no issues, secondary bedroom tv will not link to remote. Going through the automated setup process, the box recognizes that it is a Sharp TV and guides through 3 different options for remote codes. None of them work, and it says “unable to link to this tv.” This Sharp Tv is older… somewhere in the 2010-2012 range, but prior to having Telus TV I had Shaw Blue Curve tv and had no issues linking their voice remote to this tv. Is there a manual link option, or is there something else I could try?
  • KHR's avatar
    KHR
    2 years ago

    Hi BCTV 

     

    The manual process is slightly different for the TELUS TV Digital Box remote with Google Assistant. The instructions aren't included in the link FuzzyLogic shared since there are thousands of codes for the hundreds of TV manufacturers and automatic pairing is normally quite robust.

     

    1. Press and hold both the input and OK buttons on your remote for 3 seconds. The green LED should stay on.

    2.  Enter the first code using the number pad. The green LED will blink twice and then go off. 

    3. Test the mute or volume up/down button. If these work, you're done.

    4. If they don't work, repeat steps 1-3 for subsequent codes.

     

    Sharp TV codes:

    017

    187

    011

    214

    213

    326

    214

    213

7 Replies

Replies have been turned off for this discussion
  • A-B's avatar
    A-B
    Icon for Community Manager rankCommunity Manager

    Hey. On our end we actually have a bunch of codes to try for Sharp TV's and since you mentioned that you tried just a few, give these a go:

     

    1150

    1152

    1178

    1179

    1180

    1181

    1182

    1212

    1290

    1301

    1375

    1376

    1402

    1517

    1530

    1638

    1639

    1656

    1669

    1746

    1747

    1779

    1927

    1932

     

    • BCTV's avatar
      BCTV
      Helpful Neighbour
      Sounds good, I’ll give those a try… How can I manually input codes? The automated setup went through 3 different codes automatically and just said It was unable to link the remote to the tv. I didn’t see an option for entering codes manually.

      Sent from my iPhone