Forum Discussion
Solved
Programming Google Remote To Old Sharp TV
Recently signed up for Telus, and did self install for 2 optik tv+ digital boxes. Main living room tv had no issues, secondary bedroom tv will not link to remote. Going through the automated setup pro...
Hi BCTV
The manual process is slightly different for the TELUS TV Digital Box remote with Google Assistant. The instructions aren't included in the link FuzzyLogic shared since there are thousands of codes for the hundreds of TV manufacturers and automatic pairing is normally quite robust.
1. Press and hold both the input and OK buttons on your remote for 3 seconds. The green LED should stay on.
2. Enter the first code using the number pad. The green LED will blink twice and then go off.
3. Test the mute or volume up/down button. If these work, you're done.
4. If they don't work, repeat steps 1-3 for subsequent codes.
Sharp TV codes:
017
187
011
214
213
326
214
213
A-B
Community Manager
Community ManagerThere should be steps you're looking for here: https://www.telus.com/en/support/article/program-slimline-remote-2
These seem to be instructions for the older style slimline remote. I have the Bluetooth remote with Google assistant, see attached photo. Is the procedure the same? Or is it a different process?
Sent from my iPhone
- FuzzyLogic
Community Power User
This may help:
At any point after the first-time installation, you can choose to control your TV using your TELUS Remote. From the Home screen, navigate to Settings → Device settings → Remotes & Accessories → Program Remote with TV and follow the steps on screen.
Source Set up your TELUS TV Digital Box Remote | TELUS Support
KHRTELUS Team Member
Hi BCTV
The manual process is slightly different for the TELUS TV Digital Box remote with Google Assistant. The instructions aren't included in the link FuzzyLogic shared since there are thousands of codes for the hundreds of TV manufacturers and automatic pairing is normally quite robust.
1. Press and hold both the input and OK buttons on your remote for 3 seconds. The green LED should stay on.
2. Enter the first code using the number pad. The green LED will blink twice and then go off.
3. Test the mute or volume up/down button. If these work, you're done.
4. If they don't work, repeat steps 1-3 for subsequent codes.
Sharp TV codes:
017
187
011
214
213
326
214
213
- Thank you very much KHR! The process you shared worked! The second code on your list was the one for my TV. Thanks to everyone else who also contributed and tried to help!Sent from my iPhone
