vpn
2 TopicsTELUS routing issue to game servers VPN should not be necessary
Hi TELUS, I believe I am experiencing a routing/peering issue on my connection. My local network is stable, but latency to many servers including game servers is higher than what other TELUS users report. Across multiple users on the same ISP I see two routing outcomes: Some users get: ~18 ms Seattle ~33 ms Chicago Others including me get: ~1 ms Edmonton ~5–7 ms Calgary ~56 ms Seattle ~57 ms Chicago ~75 ms Los Angeles ~78 ms Dallas I confirmed this with 2 users on each path, suggesting this may be due to IP pools or upstream routing differences. Using a VPN reduces Seattle latency to ~18 ms, matching the lower latency users. The VPN routes through Zayo, suggesting a better path exists but is not used by default. Traceroutes show TELUS is stable (~1–26 ms), but latency increases by ~30 ms at a Seattle transit hop (e.g. NTT). I have tried basic troubleshooting (rebooting router) with no change. Setup: TELUS fibre, wired Ethernet, TELUS NAT Testing: in-game latency, ping, traceroute Seattle, WA (128.116.115.0/24) → ~56 ms Los Angeles, CA (128.116.116.0/24) → ~75 ms Chicago, IL (128.116.48.0/24, 128.116.84.0/24) → ~56 ms Dallas, TX (128.116.95.0/24) → ~78 ms Ashburn, VA (128.116.102.0/24) → ~74 ms Location: Edmonton, Alberta Here are some images of Traceroutes.145Views0likes1Commentvpn server on second router with Telus wifi hub
Hi, looking for a bit of help in setting up a second router with a Telus wifi hub. I recently bought a tp-link archer a10 to use together with the Telus wifi hub. I connected the a10 router to port1 of the wifi hub and then on the wifi hub, I switched lan1 to bridge mode. With these settings, the a10 is able to get a wan ip, and I'm able to connect to it from outside via openvpn. What I'd like to do is be able to access local ip's on the wifi hub from the a10 - like access local resources through openvpn on the a10. Is this possible? Searching online, I think I'm supposed to add static routes on both routers so they can communicate with each other, but afaik, you can't configure static routes on the wifi hub. Or is there a different method to accomplish what I'm trying to do? Thanks in advance5.2KViews0likes1Comment