To check your firmware history, log onto the Actiontec as admin and go to Advanced Setup. Look under the Modem Utilities section on the left hand side menu you will see Upgrade History. Click on that and it should show you your firmware changes. I'...
hdsheena, Our router firmware was upgraded to 31.164L.18 on December 5th and our system uptime is almost 11 days indicating there was a reboot sometime after the firmware update (not done by the household). I personally have yet to experience the IP...
There are a number of workarounds that are technically viable:- Assign all devices with static IP addresses and DNS entries (forget about using the router as a DHCP service) or for anything else service related for that matter as long as it continues...
I have a feeling it is related to the recent firmware upgrade that took place. On September 4th, 2018, my router was upgraded to 31.164L.16 from the previous version of 31.164L.12 which was put on back in November 8th, 2017. I can see the upgrade h...
That does make sense however they could not articulate their position thus leading to the situation we had encountered. On top of that our services are above ground off the pole in the back lane 10' from our car garage door. Regards, Mike.