cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Harmony 350 remote/guide scrolling

HGolightly
Connector

Hope u can help.

i have a harmony 350 remote. I can bring up the Optik TV guide, and  scroll through channel by channel. i am assuming the arrow buttons to the left of the "guide" button is meant to scroll the guide page by page, but it does not do this.

what am i missing

 

thnx all

1 ACCEPTED SOLUTION

Been a while since I used a harmony but you can use the learn IR to function as you want then upload to the remote. (Make sure in Optik mode)

https://support.myharmony.com/en-us/teach-harmony-a-missing-command

I assume you tried the other remote profiles.

Find a post useful, please click on "Like" to give the author recognition or mark as an accepted solution.

View solution in original post

3 REPLIES 3

WestCoasterBC
Community Power User
Community Power User
Have you tried the channel up and down button? As long as you configured the harmony correctly it should have retained the exact functions.

Find a post useful, please click on "Like" to give the author recognition or mark as an accepted solution.

Thx for the reply. Channel up/down, while the guide is open, scrolls through one channel at a time. The Optik TV remote allows me to scroll a full page, as well as one channel at a time.

Been a while since I used a harmony but you can use the learn IR to function as you want then upload to the remote. (Make sure in Optik mode)

https://support.myharmony.com/en-us/teach-harmony-a-missing-command

I assume you tried the other remote profiles.

Find a post useful, please click on "Like" to give the author recognition or mark as an accepted solution.

View solution in original post