I've been trying for the past few days to forward ports on Telus's network, to no avail. I managed to get port 22 working, but no other ports will go through, leading me to believe that Telus has blocked the rest, even though the phone representative assured me that the ports were open. He had told me that ports 80 and 25565 were blocked, but I tried other ports he said were open, and they were blocked. I looked at the forums a lot, and other posts had said that Telus doesn't allow port forwarding at all, but having 22 open leads me to think that they can open them. I called Telus again today, and a different representative told me that I would need to pay for Advanced Support to get any help whatsoever with this. I'd really like to get this working, as my previous ISP had allowed port forwarding, but I would like to stay with Telus. Any help would be really appreciated.
@WestCoasterBC I'm trying to hopefully setup a Minecraft Server, HTTP server, and SSH. The port for SSH works, but I was told that the ports for HTTP and Minecraft are blocked. However, ports that I was told are open by a Telus phone representative, like 26185, 32904, and 5819, which are just random numbers, are blocked too. I have it configured at the router/modem level, but I can't access them.
Telus' technical support doesn't support port forwarding and I'd be extremely surprised if they knew which, if any, of the ports were really blocked outside of 80. The extreme majority of ports are not blocked.
The blocked ports primarily are:
- 21 (ftp)
- 25 (smtp)
- 80 (http)
- 110 (pop3)
- 135-139 (dcom and netbios)
- 443 (ssl)
- 445 (ms-ds)
- 1433,1434 (ms-sql))
- 6667 (irc)
There is also no way to unblock one of those unless you get a business plan where they are not blocked at all.
You'll also want to make sure the PC you're trying to run a server on is hardwired and not wireless. The ports may not be forwarded correctly on the modem itself as well, or it's just forwarding them internally on your home network instead.
Telus obviously hasn't heard of net neutrality.
It's ludacris to have to get a "server" plan when you don't run any servers just to open ports.
It's a gouging cash grab, if I am at friends/relatives place and cannot open the ports I need for personal use access to my machines...
I am trying SSH on different ports and it's not working, did they start using protocol filtering?
Assuming your ports on your pc are properly configured, ( you can test internally), then you CAN forward your internal ports to a higher external one
make <your.outside.ip>:25500 to route internally to <your.server.ip>:80 (if 80 is what you need). all that is accomplished through NAT
be aware that your external IP address is not static, changing every once in a while. Also your internal setup maters; some hypervisors have issues with double NAT so you need to manually edit that
for more information on what NAT is and how it works, i would start reading here https://en.wikipedia.org/wiki/Network_address_translation
Commonly used ports are blocked for safety reasons to a great extend. It doesn't prohibit you from using your internet on a recreational way. Some intermediate network knowledge and some reading/tweaking your systems is probably required.
Can you please detail how to do this? Im trying to get my plex server a open port so my family can use it while we are under quarantine. I have forwarded the port in question in the actiontek 3200 settings, under the firewall/port forwarding tab but it still shows as closed and my plex server still says it can not be accessed outside of my lan.