05-20-2019 12:15 AM
Solved! Go to Solution.
08-11-2021 06:45 PM
See my previous post. You should try to read the online manual, check online support or the instructions for the smart switch to determine if it requires everything to be on the same SSID.
05-20-2019 12:34 AM
Disable SmartSteering in the wifi settings on the Actiontec. That will create two networks. One 2.4 and one 5GHz.
05-20-2019 01:28 AM
05-20-2019 03:00 AM
You can set a password for each. You can have them the same if you like. Just use slightly different network names so you can tell which is the 2.4 vs 5.
08-11-2021 03:35 PM
08-11-2021 04:05 PM - edited 08-11-2021 04:06 PM
It will really depend on the smart device and the app used to control it. Some will work across separate networks in the home. Some will require the phone to be on the same network as the smart device. There are so many different devices out there it's hard to give an exact answer.
08-11-2021 04:13 PM
08-11-2021 06:45 PM
See my previous post. You should try to read the online manual, check online support or the instructions for the smart switch to determine if it requires everything to be on the same SSID.