Forum Discussion
Solved
Yet Another Bridging Question
This might be a dumb question so bear with me. I've had Pure Fibre (1G) for the past two years, bridged the Telus stuff to use my own modem, all working fine. Recently upgraded to the 3G pack...
Ok sorted!
I completely forgot that I am using the Moca port to reach my router on another floor and I assumed it was the equivalent to the 10G port when it came to bridging.
I just did a full bridge (which is what I must've done two years ago when I first got fibre) and now my router is showing the external IP as its WAN IP. I'll try remoting tomorrow when I'm at my office.
I know I lose out on Optik TV but I really don't have much interest in that. Should that change I suppose I could add my own Moca adapter to an ethernet cord plugged into the 10G port and reset and re-bridge just the 10G port again. đ
Ok sorted!
I completely forgot that I am using the Moca port to reach my router on another floor and I assumed it was the equivalent to the 10G port when it came to bridging.
I just did a full bridge (which is what I must've done two years ago when I first got fibre) and now my router is showing the external IP as its WAN IP. I'll try remoting tomorrow when I'm at my office.
I know I lose out on Optik TV but I really don't have much interest in that. Should that change I suppose I could add my own Moca adapter to an ethernet cord plugged into the 10G port and reset and re-bridge just the 10G port again. đ
