Forum Discussion
Solved
Telus Wifi 6 Access Point Questions
Hi, I just had Telus PureFibre 1.5 GB internet installed in my Vancouver BC apartment, which includes a Telus Wifi 6 Access Point. I can’t find a model number for the Telus-supplied Access Point, but...
"Presumably, that ethernet jack runs to the ONT located in a closet in another room." It should run to your router.
"I tried to adjust the Telus Access Point’s settings by logging into 182.168.1.254" 192.168.1.254 will log you into the router (you will need the credentials from the routing device to complete the login). Once there, you can find the IP address of the Wi-Fi 6 device (usually labeled Boost2.0 or similar) and connect using the credentials on the device. You can then seethe options of the Wi-Fi 6 device.
Yes you can use other AP devices, but you may have difficulty if you have Optik TV, as most Wi-Fi devices do not have the necessary Multicast signal needed for Optik.
FuzzyLogic
Community Power User
Community Power UserI believe I have the same AP and it's connected to the router using the MOCA connection without issue. I also use the ethernet ports on the AP and they work fine but seem to 'hibernate' if not used for a while and take a bit of time (~30 seconds) to wake when the device connected to them is turned on.
When I login to my AP and select the Wi-Fi tab on the left I can then select each band and specify a channel if desired:
