Forum Discussion
Solved
Problem connecting devices to Telus modem
I have a Honeywell thermostat which connects to the internet via a redlink internet gateway. I have issues connecting the redlink to the internet (via cable) and I was told it is a common issue with t...
FIXED!!! No need to replace modem.
- Open browser, type in 192.168.1.254 to open admin portal
- type "admin"; password admin password from modem
- "Change the device login password" - skip
- Dashboard - left menu - click Network
- Network dashboard - top menu - hover over LAN - click on BRIDGE
- BRIDGE page - check ENABLE BRIDGE (opens LAN PORT dropdown options - click LAN 1 (refers to port options on back of modem)
- click SAVE SETTINGS ("applying changes ...")
- Logout
- Unplug power from Redlink Gateway device, wait 10 seconds, plug back in.
- Ethernet light should turn GREEN now
- Test - open TCC app, adjust thermostat, see if thermostat registers change.
- THANKS ANNA!!!
It just won't connect. It connected ok for a few minutes and then refuse to connect again. Tech guy who set up the thermostat says he encountered many instances when the isp is Telus and the modem is the white one as opposed to the black one.
I have the exact same issue...Telus tells me the problem is with Honeywell, the supplier of the device and Honeywell says its related to Telus. Anyone?
I have the same issue. Both of what Telus and Honeywell is correct. I'm sure it's more on the Telus side. I think their router is picking up the communication to Honeywell as a hacking attempt. The solid yellow light means it's on the network but, it's unable to get to the Honeywell server.
Do you know what the firmware version of the WI-Fi 6 units are? and is there any switch in your environment?
