NH20A Bridge Mode and admin page not find

Ming Wrote: I pick the 10G Bridge mode in this case.

Your taxing my memory here, so be warned.

Correct mode to pick as it passes the raw connection through the 10Gbps port on the NH20A unobstructed. You as well are correct in assuming that you may have to reset the modem to gain access to the modems web page, as its only working as a media converter now.

Frankly, I'd just leave well enough alone with your system. You have full throughput, you've gained access to your entire speed allotment, and have control of your network at the UDMPro SE configuration level. This is about as good as you could possibly expect. bee happy.... Cheers...

If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.