Forum Discussion
NH20A - How to disable full bridge mode?
I set the NH20A to full bridge mode while testing a 3rd party router (that I learned is faulty). Now I am trying to log back into the modem (or whatever the bleep this restrictive piece of junk is) ...
BuddyBren Wrote: Now that it is in full bridge mode I am assuming all ports are no longer accessible for the 192.168.1.254
Good day,
You are indeed correct the 192.168.1.X range would be nonassessable from a bridged point.
You did hit the nail on the head when you reset the NH20A to factory settings. This is the only way that you will be able to get back to the standard IP range. Now not that I doubt that you really did get the device to reset, my question would be what method you utilized to do that?
Paperclip in the reset hole of the front of the NH20A? webapp from your phone? this would be helpful to know. I do know that the paperclip in the reset hole foe 20 or so seconds seems to be the best that I have found to do it...
failing that you could always call support, they have the ability to remotely factory reset the device from that end, if all else fails...
If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.
