Forum Discussion
Solved
New Telus PureFibre installation Quebec
Hi everyone, I'm new to the Telus fibre family. Today was the day of the installation. The first tech who came was a Bell technician, and luckily I manage to call the Telus tech when the Bell tec...
Hey Peter, I'm currently using the Ontario service of telus pure fibre, and have bypassed the NHA20 by using a fiber media converter. WARNING, this will only give you ipv4 as of now and NO IPV6. Here is the link to the one I used. You are going have to set all the PPPOE and VLAN settings as follows,
VLAN ID: 40
Priority: 0
802.1q tag: yes
Be sure to use the SFP module provided to you by the tech
Hey Peter, I'm currently using the Ontario service of telus pure fibre, and have bypassed the NHA20 by using a fiber media converter. WARNING, this will only give you ipv4 as of now and NO IPV6. Here is the link to the one I used. You are going have to set all the PPPOE and VLAN settings as follows,
VLAN ID: 40
Priority: 0
802.1q tag: yes
Be sure to use the SFP module provided to you by the tech
May I ask how to get the Bell SFP module? The Bell technician left a Nokia ONT for me instead. And with this fibre media converter, is it still possible to have Optik TV cable box?
That is surprising, because the NAH would only take SFP module, I think he might have made a mistake. When the Bell tech came to my house, he first was going to install the Nokia ONT. Luckiliy the day before the Telus tech called me and asked me to talk to the Bell tech when he will be there. He told him not to install the ONT, but the SFP.
It seems to be working with the Nokia ONT, but it's an extra box, which I would've preferred to not have. It's connected to the NAH through Ethernet and the NAH has a PPPoE connection
Where does the connection occur on the NAH? That's weird because I thought the NAH could get internet only trough an SFP module connected on the NAH. I can't see a place where you connect with ethernet to the WAN.
