Forum Discussion
Solved
New Telus PureFibre installation Quebec
Hi everyone, I'm new to the Telus fibre family. Today was the day of the installation. The first tech who came was a Bell technician, and luckily I manage to call the Telus tech when the Bell tec...
Hey Peter, I'm currently using the Ontario service of telus pure fibre, and have bypassed the NHA20 by using a fiber media converter. WARNING, this will only give you ipv4 as of now and NO IPV6. Here is the link to the one I used. You are going have to set all the PPPOE and VLAN settings as follows,
VLAN ID: 40
Priority: 0
802.1q tag: yes
Be sure to use the SFP module provided to you by the tech
MrFiber, I was wondering what is the maximum speed you could achieve using speedtest? Mine goes up to 1430mbps. I might be picky, but knowing that I pay for 1.5gb, I wanna be able to achieve that speed!
Hey Peter,
I have tested my connection but currently I’m limited to 1 gig due to my gear. Which is approximately is 940 mbps on actual speed test. Now if your getting into technical specs yes your connection can support 1.5gig. Now if your actually going to get 1.5gig is not technically possible due to overhead connection bandwidth that your router is using. In my experience I’ve only gotten 1.5 gig speedtest on only one connection which is rogers, however I’m guessing that they don’t do speed limiting to each client.
