Forum Discussion
Solved
IPv6 doesn't work on Telus home service.
When staying with my daughter in Victoria, I noticed that the Telus service seemed to support IPv6. I got a public IP address on my laptop, and could ping google.com. I could also ping6 my laptop bac...
Thanks.
192.168.1.254 is a NH20T fibre hub. The admin password is on a sticker under the front cover. It's not obvious how to remove that; pulling on the bottom edge with a screwdriver worked per this Reddit post
Under "Firewall", I can either leave the firewall level at "low" and disable IPv6 firewall, or set the firewall level to "user", click "show advanced", and add an "accept" firewall rule for e.g. SSH.
TELUS_Support
Official Support Team
Official Support TeamCan you try these steps to see if you can get SSH working? You'll need to tell the TELUS Gateway to trust that specific inbound traffic. Here’s how you can do it while you’re visiting:
Access the Gateway: Open a browser and go to 192.168.1.254. (The admin password is usually on the sticker of the white hub in the basement or closet).
Locate IPv6 Firewall Rules: Look under Advanced Settings > Security > Firewall.
Create an Inbound Rule: You'll want to allow TCP Port 22 (or whatever port your SSH is on).
Thanks.
192.168.1.254 is a NH20T fibre hub. The admin password is on a sticker under the front cover. It's not obvious how to remove that; pulling on the bottom edge with a screwdriver worked per this Reddit post
Under "Firewall", I can either leave the firewall level at "low" and disable IPv6 firewall, or set the firewall level to "user", click "show advanced", and add an "accept" firewall rule for e.g. SSH.
- TELUS_Support
Awesome and good to know. Looks like you were able to setup the firewall rule.
