Forum Discussion
Solved
I upgraded to PureFibre 1.5 GB but speed remains 1GB
It is a simple set up, one hard wired computer and Cat6 cable. Telus support not very helpful. I'm confused - did all the restarts etc... Any suggestions ?
MariuszStepien Wrote: which should support connection up to 10GB
No sorry, it only supports a 1Gbps connection... Cheers...
If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.
Was wondering what router you currently have from Telus? I believe you need the new Network Access Hub in order to get speeds beyond a gigabit, as that has the 10G ethernet port. Not sure about the older Wi-Fi hub though.
RyDawg Wrote: I believe you need the new Network Access Hub in order to get speeds beyond a gigabit, as that has the 10G ethernet port.
This is indeed a correct assumption. You will require the NHA style Access hub to achieve the increased speeds.
The attached is an example of the current supported style of hub capable of achieving the 1.5Gbps, 2.5Gbps speeds.... Cheers...
If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.
