Forum Discussion
Solved
Hi all how to do bridge mode.
Hi folks I’m planning to buy my own wifi router a WIFI 7 router so my two questions are. number 1 do I need to find a pfsense router? Or can I use any wifi router? Also after I bridge m...
you can use the 10 gb un managed switch to connect more devices. as a suggestion.
A 10 gig unmanaged switch can have 10 gig only or multigig 100mbs, 1000mbs or 1 gigabit, 2500 mbs or 2.5 gigabit, 10,000mb or 10 gigabit speeds on the physical network ports on the switch. They will not have any settings or configurations settings to configure. A managed switch would have settings or configurations to set.
There are a few posts on the telus forum about bridging feature between the telus network access hub and your own personal router.
It depends on personal preference of features or settings of the brands or manufacturer you are looking for of wired or wifi routers.Routers do come with wifi. Recommendations or references from users to suggest brands or manufacturer.
Pf sense router is a security device or appliance gateaway or firewall device.
Third party mocas should work fine without any issues
I hope that answers your questions, just a long time customer,hoping to help.
Awesome posum brother 👊. So if I get my own router and connect into the modem will I need to bridge mode the nah first? Or will it work smoothly planning to get a tp link router.
Will the black ont continue to work perfectly since it’s for the home phone. Thanks.
you would first connect your personal router to the port 1 lan port or the 10 Gb lan port on the telus network access hub modem.
last step is to configure the bridge mode setting either port 1 lan port or the Port 10 G bridge mode setting.
Or is 10gbps already running into both the nah and Nokia ont.
you can use the 10 gb un managed switch to connect more devices. as a suggestion.
Gotcha is it possible to do it the other way around connect a cat 8 cable into the black ont port from the port connect into the 10gbps unmanaged switch. Then connect one of the 10gbps port into the nah then turn on bridge mode of one port 10gbps. Because back of the wifi router there’s a 10gbps wan port. Thanks! Or should I call Telus to freeze the 10gbps on the nah and activate its home phone port?
what is the brand or manufacturer of the black ont?
