Forum Discussion
Solved
Getting a 2.4g signal out of the new wifi6 modem
I have just had the new round dome type modem installed ... and now my WiFi B-Hyve Irrigation Timer will not connect to it. Research seems to indicate that the B-Hyve will only use a 2.4g signal ... ...
The default IP for all Telus routers/gateways is 192.168.1.254. If you are using a third party router, the IP may be different. The IP for the Boost wireless access points (Wifi6 and Wifi6e) can vary. If you can access the main gateway using 192.168.1.254, you should be able to see the connected devices to find the IP for the Wifi6 AP.
Yes this is what I suspected ... but when I attempt to log into the modem with the addys above all I get is "This site can't be reached" ... how do I get the correct addy for my modem?
Nighthawk
Community Power User
Community Power UserThe default IP for all Telus routers/gateways is 192.168.1.254. If you are using a third party router, the IP may be different. The IP for the Boost wireless access points (Wifi6 and Wifi6e) can vary. If you can access the main gateway using 192.168.1.254, you should be able to see the connected devices to find the IP for the Wifi6 AP.
Yup, took me a bit but once I got the proper addys all went well - thanks!
