Forum Discussion

Friendly Neighbour

6 years ago

Eliminate Nokia ONT... go direct to my own router's SFP port

When my PureFibre service was installed, I used my own router from the Telus provided Nokia ONT. The installer indicated that I could go direct to my own router if it had an SFP port. At the time, I ...

Neighbour

5 years ago

Ubiquity sells these GPON ONT SFP. The standard is 1.2gbps up and 2.4 down.

Related Content

Bypass Telus ONT/router with SFP in own router
Some claim this will work, others say it has problems and wont. Let's say your default fiber setup is a Telus optical SFP transceiver attached to the T3200M/other. Unplug the SFP and plug it into ...
Solved
Titanium
3 years ago
10KViews
3Comments
Eero Pro router with Nokia ONT
Hello, I've recently been advised in this forum that I could use a 3rd-party modem instead of the T3200. (The reason for the change is a rather complicated setup that still relies on an old coppe...
Solved
SamSamSam
6 years ago
11KViews
8Comments
Switch and Router Connected Directly to ONT
Hey everyone, I have had an idea brewing for a bit now on how to fix the Wi-Fi upstairs. Long story short, we have a pretty big house that's been finished already. The previous owners only wired ...
Solved
gigabituser1234
6 years ago
16KViews
16Comments
ONT to desktop and separate router?
Couldn't find any prior threads specific to this question (although some were very close!). My desktop is in the basement, along with my ONT and 3200M. The house is Ethernet wired and I have a UBIQ...
Solved
Hipwood
4 years ago
3.7KViews
4Comments
Connect ONT and router to patch panel
Hi I'm using fibre internet for my home networking. The current setup looks like this: ONT -> Nokia ONT -> patch panel ----wall----> Telus WiFi Hub -> Google Wifi Router [ --------- garage ----...
Solved
Binkt
5 years ago
4.9KViews
5Comments

Recent Discussions