Forum Discussion
Cannot reach via WAN IP / Port forwarding, from LAN
I just got installed with PureFibreX with NH20A access hub and I set up my port forwarding. It seems to work from outside. For example I set up port forward 8080 while my WAN IP is 207.6.89.123. I...
feiya200 Wrote: However I cannot telnet the same IP/port from my LAN computers.
You did not specify your topology so I'm guessing:
Hypothesis: You have a server NATed from the outside to its internal IP and you want to access it from the inside using its outside IP.
The problem is that you NAT rule most probably is mapped to your outside network interface as well. This way it's not NATed and unless you have some egress filtering your connection goes outside to the net.
You either have to make a NAT rule for your "loop" connection and make all traffic cross you LAN twice or simply connect to it directly using its internal IP.
If you find a post useful, please give the author a "Kudo", or mark as "Solution", if it solves your problem, thank you very much.
