Forum Discussion
Advice on Boost WiFi support for Apple devices
Hey, all this COVID period has definitely meant way more traffic on the home-network, which includes these features: Telus PureFibre 300 ActionTek T3200M router Telus Boost WiFi - 3 WAPs dep...
Ok, great advice on the timing of the firmware update! I can see that 1 of my Boost WiFi units has picked up the update. I'll deploy the other Boost units and monitor the user-experience to see if that resolves the issues we were having earlier in the spring.
Thanks much for your feedback!
Hopefully the firmware updates work for you.
Not sure why (i lie i know its marketing) Telus is pushing the WiFi boost units out now when IMO the solution they had prior to this was superior.
Have been suggesting this a lot today, but it seems to apply to so many situations.
If your house is wired with COAX for cable.. Find a used T3200M cheap and pair it with your existing one via MOCA to a second location in your house that has it COAX wired the same way you would to a wifi boost unit.. these modems really do give a strong signal, keep the same SSID, and you also get a 4 port Ethernet switch at both locations for additional wired devices.
As far as wifi APs I have played with many both personally and in customer deployments and for the most part if its not Cisco or Ubiquiti don't waste your time or money. You will not get the same performance from a device built to minimal cost to support a handful of users that you will get from enterprise grade equipment designed to support hundreds. You get what you pay for and that's why a wire be it RJ45, COAX, or Power line adapter based off the existing wiring of your house will always be more bang for the buck at consumer budget. The performance of the T3200M's at this budget in terms of actual WiFi signal and features is not to be underestimated.
That said if money is no concern, spring for 100% Ubiquity backbone and AP's and don't look back, don't handicap yourself by not getting the 10Gbit switches either 🤑
