Forum Discussion
Vincent86
4 years agoHelpful Neighbour
1.5G Fiber never reached
We have the 1500/940 plan, but my speeds never exceed ~900mbps. A Telus technician installed the Nokia G-240G-A and it goes into our UniFi Dream Machine Special Edition WAN2 port, which support 1...
- 4 years ago
Vincent86 Wrote: A Telus technician installed the Nokia G-240G-A .
I suspect the problem is all the Wan/Lan ports of that device are locked at a maximum speed of 1Gbps. I would contact Telus and have your router/modem swapped out for either the Nokia XS-250X-A or the Arcadyan NH20A. Both have a 10Gbps Lan port, both can be put into bridged mode. Then connect the Lan port to your Wan port on the UDMpro SE, however, you'll have to lock the UDMPro SE this time at 10Gbps. That should allow your maximum 1.5Gbps throughput. Cheers
If you find a post useful, please give the author a "Kudo", or mark as "Solution", if it solves your problem, thank you very much.
Vincent86
4 years agoHelpful Neighbour
Is there any 3rd-party 10G SFP module I can use and activate with the help of a technician?