Forum Discussion

brettswill's avatar
brettswill
Neighbour
4 years ago

Wifi Hub

Hi all,

I moved from an appartment to a house and I took my T3200 with me. The telus tech came and installed it at the new house and gave me a pair of wifi boosters.

So I setup the boosters but they wont mesh with the T3200. After I did some research I found this is an expected behaviour.

My brother has a Telus Wifi Hub that meshes with the boosters properly. Is it possible to still get this unit and will the ONT from the T3200 work in the Wifi Hub?

Thanks for any help.

5 Replies

Replies have been turned off for this discussion
  • brettswill Wrote: So I setup the boosters but they wont mesh with the T3200.

     

    Perhaps try the following, just to make sure you didn't miss any of the steps. The Boosters and the T3200M should interconnect with very little problems.

     

    The following video should walk you through the setup from end to end... Cheers...

     

    https://www.youtube.com/watch?v=4QtAij5lK44

     

    If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.

     

    • brettswill's avatar
      brettswill
      Neighbour
      Yes, that is the exact process I followed, but even as the video suggests the "new" boost network is seperate from the original T3200 network. Id like to have all three devices meshed in a single network.
      • DrPacman's avatar
        DrPacman
        Rockstar

        brettswill Wrote: Id like to have all three devices meshed in a single network.

         

        I would just rename either the T3200M WiFi SSID the same as the boosters, or vice a versa including the Password. That way you'll have one SSID Wireless network, and not 2. That should alleviate your problem.

         

        If you find this post useful, please give the author a "Solution", or mark as "Kudo", if it solves your problem, thank you very much.