Forum Discussion

Neighbour

11 months ago

Modem

What does the red explanation mark mean when the system does a check equipment test ?

1 Reply

TELUS_Support
Official Support Team
11 months ago
A red exclamation mark during a Check Equipment Test typically indicates an issue with the tested equipment. This could mean a connection problem, a service disruption, or a hardware issue.

Related Content

Bridge mode on recent modems?
Hi, I'm contemplating moving from Bell to Telus but I want to be sure it is possible to configure the recent Telus Fiber modems in bridge mode. I already have a complet network configuration and I d...
Solved
jmspaggi
2 months ago
508Views
1Comment
Fibre Modem Disconnecting Intermittently
After 3 months of largely no issues my fibre modem is randomly disconnecting and reconnecting for the last 3 days. When it happens my phone, internet and TV all stop working. I called support and all...
Solved
GTVic
7 months ago
1.2KViews
3Comments
Radio modem network failure
My control panel gave an alert of a "radio modem network failure" and after rebooting my control panel it didn't fix the issue. Vivint replaced the modem a few years ago when it failed because it was...
Solved
mayop
2 years ago
3KViews
4Comments
PureFibre Modem - Networking
When the PureFibre Modem is installed by the technician is only one of the LAN ports activated? I have my own internal Ethernet network and would like to use more than one port on the modem to limit t...
Solved
Yelxop
3 years ago
12KViews
13Comments
Fiber Modem connection to Network Switch
Hi, I just got Telus Fiber in my home. I have connected one of the LAN ports to our home Network Ethernet Switch and I am getting "can't assign IP address" errors on some home computers. Do...
Solved
SmilinVamp
2 years ago
5.3KViews
7Comments